Delicious Tuning – Flex Fuel Kit is a complete seamless Flex Fuel solution for your engine management tuning software, whether it be Cobb, EcuTeK or whatever system you choose. Our FlexFuel system determines the content ratio between gasoline and ethanol content in the fuel. It then sends a signal to the ECU which dynamically computes the correct air/fuel ratios, ignition timing values, boost levels, cam angles, traction control and more based on the ethanol content. This kit features monitoring ethanol content through the Delicious Tuning Bluetooth App.
All emissions related devices are still 100% operational with our IAT Input Flex Fuel Kit(s) and the intake air temp is still being used as it was intended by the vehicles OEM engine management system. Our IAT Input Flex Fuel Kit(s) supports IAT (Intake Air Temperature) compensation and still measure/send the appropriate temperature signals to the ECU via our module for proper calculation over a broad range of temperatures. Compensation for cold start works as intended as we have implemented custom code in our IAT Input Flex Fuel Kit(s) that is transmitted to the ECU for proper startup on a range of ethanol blends.
Flex Fuel Diagnostic System that can detect electrical opens, electrical shorts, sensor failures or even too much water within the fuel. The fault detection can diagnose an open in the electrical system, short, bad ethanol sensor, too much water in the fuel system, and fuel pressure loss.
Dynamic Engine Safety System (DESS), you can rest assured that in the event of a fuel pressure loss, your engine will be protected. Our safety system (the only one on the market) will rapidly detune the engine to avoid damage brought on by a sudden fuel pressure loss of the low side fuel pressure pump. This system protects your engine form failure due to a lean condition, thus protecting the engine from possible damage brought on by pre-ignition.
Delicious Tuning FlexFuel BlueTooth Kit includes:
- Delicious Tuning FlexFuel Ethanol Content Analyzer with Integrated BlueTooth
- Delicious Tuning Smart Phone Applications (Android or iPhone Compatible)
- Delicious Tuning Hand Assembled and Pressure Tested Fuel Lines
- Delicious Tuning Mounting Bracket and Hardware
- Delicious Tuning Plug and Play Harness
- Continental Flex Fuel Sensor
- This update can only be used with the Cobb Accessport V3 / EcuTek ProECU Software
- A new flex fuel tune from us or an authorized Cobb Protuner / EcuTek Master Tuner
All parts and services offered by Delicious Tuning have undergone extensive in-house testing and evaluation to insure the highest level of quality and performance. All parts and services are guaranteed to be free from material and manufacturing defects at the time of receipt by the customer. Parts that are damaged by means of water or coolant ingress are not covered under the terms of our warranty. However, the standard warranty in the industry is none at all on parts. Such parts are thus sold “as-is” without any warranty whatsoever. There are no implied warranties of merchant-ability or fitness for a particular purpose. There are no warranties that extend beyond the description on the face of this agreement. Delicious Tuning is not responsible for incidental and consequential damages, property damages, or personal injury damages to the extent permitted by law. Implied warranties of merchant-ability and fitness, in as far as they are applicable, are limited to a term of one (1) year from the original purchase, with a copy of the original invoice.